Now Back In Stock The Shure 55SH Series II Microphone

http://www.promusicalaska.com/wp-content/uploads/2014/10/55SH.jpg Shure 55SH Series II Microphone

An unmistakable stage icon for 70 years, the Shure 55SH Series II Unidyne® Vocal Microphone features a signature satin chrome-plated die-cast casing for pure vintage look and feel with modern acoustic components to meet today’s performance standards. This microphone is excellent for vocal pickup with its characteristic Shure presence peak.

The 55SH Series II microphone has a cardioid (unidirectional) polar pickup pattern that minimizes sound pickup from the rear of the microphone. This allows the Model 55SH Series II to be used in close proximity to loudspeakers without creating feedback problems, and it can perform under adverse acoustic conditions where omnidirectional microphones cannot.

55SH Series II: Includes Swivel Stand Mount, On-Off Switch. Cable not included.

Features

Classic appearance, modern performance

Frequency response tailored for speech, vocals and instrumental music

Cardioid directional pattern for optimum performance in adverse acoustic environments

Shock-mounted cartridge minimizes stand-transmitted noise, ensures quiet operation

Rugged die cast casing for reliability under rigorous conditions

Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backward
Type: Dynamic

Frequency Response: 50 to 15,000 Hz

Polar Pattern: Cardioid (unidirectional), uniform with frequency, symmetrical about axis

lmpedance: Microphone rating impedance is 150 ohms (270 ohms actual) for connection to microphone inputs rated at 75 to 300 ohms
Click to launch MicLab

Now Back In Stock The Shure BLX24/PG58 -J10 Handheld Wireless System

http://www.promusicalaska.com/wp-content/uploads/2014/10/BLX24PG58.jpg Shure BLX24/PG58 -J10 Handheld Wireless System

Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.

System Features

Up to 12 compatible systems per frequency band (region dependent)

One-touch QuickScan frequency selection quickly locates the best open frequency in case of interference

Up to 14 hours of continuous use from 2 AA batteries (included)

Up to 300 ft (91 m) operating range for total wireless freedom

XLR and ¼” output connectors

Rugged and reliable Shure construction

Legendary Shure microphones options featuring integrated microphone capsule design

CONSUMER ALERT Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

BLX Wireless Manual

Now Back In Stock The Fender CD60CE Sunburst Acoustic Guitar With Hardshell Case

http://www.promusicalaska.com/wp-content/uploads/2014/10/CD60CE-Sunburst-Left-e1420491511893.jpg Fender CD60CE Sunburst Acoustic Guitar With Hardshell Case

FEATURES

Dreadnought cutaway body style

Fishman® Isys™ III pickup system with active preamp, tuner, volume and tone controls

Spruce top with scalloped “X” bracing, mahogany back and sides

Black, Natural or Sunburst gloss finish

Graph Tech® NuBone™ nut and saddle

Includes hard-shell case

BODY

BODY BACK: Laminated Mahogany

BODY SIDES: Laminated Mahogany

BODY TOP: Laminated Spruce

BODY FINISH: Gloss Polyurethane

BODY SHAPE: Dreadnought Cutaway

BRACING: Scalloped X

ROSETTE: White Pearloid Acrylic

NECK

NECK MATERIAL: Mahogany

NECK FINISH: Gloss

NECK SHAPE: “C” Shape

SCALE LENGTH: 25.3″ (643 mm)

FINGERBOARD MATERIAL: Rosewood

FINGERBOARD RADIUS: 11.81″ (300 mm)

NUMBER OF FRETS: 20

NUT MATERIAL: Graph Tech® NuBone™

NUT WIDTH: 1.69″ (42.9 mm)

POSITION INLAYS: Pearloid Dot

TRUSS ROD: Dual-Action

ELECTRONICS

SPECIAL ELECTRONICS: Fishman® Isys III System with Active Onboard Preamp and Tuner

HARDWARE

BRIDGE: Rosewood with Compensated Graph Tech® Nubone™ Saddle

BRIDGE PINS: White with Black Dots

HARDWARE FINISH: Chrome

TUNING MACHINES: Die-Cast

PICKGUARD: 1-Ply Black

MISCELLANEOUS

STRINGS: Fender® Dura-Tone® 880L (.012-.052 Gauge)

OTHER FEATURES: Dual Action Truss Rod, 3mm Dot Position Inlays, Black Pickguard, White Bridge Pins, and Crushed Acrylic Rosette

ACCESSORIES

CASE/GIG BAG: Hardshell Case

UPC 717669961770

Now Back In Stock The Fender CD60 Sunburst Acoustic Guitar With Hardshell Case

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-CD60-Sunburst.jpg Fender CD60 Sunburst Acoustic Guitar With Hardshell Case

Model Name: CD-60, Sunburst

Model Number: 0961539232

Series: Classic Design

Color: Sunburst

Body Material: Laminated Spruce Top with Laminated Mahogany Back and Sides

Body Finish: Gloss Polyurethane

Body Shape: Dreadnought

Bracing: Scalloped X

Body Back: Laminated Mahogany

Body Sides: Laminated Mahogany

Body Top: Laminated Spruce

Neck Material: Nato

Neck Finish: Gloss

Scale Length: 25.3″ (643 mm)

Fingerboard: Rosewood

Number of Frets: 20

String Nut: Graph Tech® NuBone™

Nut Width: 1.69″ (42.9 mm)

Position Inlays: Dot

Truss Rods: Dual-Action

Special Electronics: N/A

Bridge: Rosewood with Compensated Graph Tech® Nubone™ Saddle

Hardware Finish: Chrome

Tuning Machines: Die-Cast

Pickguard: 1-Ply Black

Strings: Fender® Dura-Tone® 880L (.012-.052 Gauge)

Unique Features: Dual Action Truss Rod, 3mm Dot Position Inlays, Black Pickguard, White Bridge Pins, and Crushed Acrylic Rosette

UPC 717669961800

Now Back In Stock The Fender T-Bucket 300CE Blue Acoustic Guitar

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-T-Bucket-300CE-Blue2.jpg Fender T-Bucket 300CE Blue Acoustic Guitar

The other great T-Bucket™ 300CE features you already know are still here, too. These include flame and quilt maple tops in several finishes with quartersawn scalloped “X” bracing, mahogany back and sides, body binding and headstock pinstriping, mahogany neck, rosewood fingerboard and bridge, strap-pin and end-pin jacks, and Fishman® Isys III pickup/active preamp system with built-in chromatic tuner, on/off switch, three-band EQ and volume control.

Model Name: T-Bucket™ 300CE, Rosewood Fingerboard, Transparent Blue, Quilt Maple

Model Number: 0968079020

Series: Hot Rod Design Acoustics

Color: Transparent Blue

Body Material: Quilt Maple Top with Mahogany Back and Sides

Body Finish: Gloss Polyurethane

Body Shape: Dreadnought

Bracing: Quartersawn Scalloped “X”

Rosette: T-Bucket Pinstriped

Body Binding: Multiple

Body Back: Laminated Mahogany

Body Sides: Laminated Mahogany

Body Top: Flame Maple, Quilt Maple, or Quilt Ash

Body Depth: 3.75″ (Front) to 4.75″ (Rear)

Neck Material: Mahogany

Neck Finish: Gloss

Neck Shape: “C” Shape

Neck Binding: White

Scale Length: 25.3″ (643 mm)

Fingerboard: Rosewood

Fingerboard Radius: 11.81″ (300 mm)

Number of Frets: 20

String Nut: Graph Tech® NuBone™

Nut Width: 1.625″ (41.3 mm)

Position Inlays: Dot

Controls: Built-In Chromatic Tuner with On/Off Switch, Volume, Bass, Mid, Treble

Special Electronics: Fishman® Isys III System with Active Onboard Preamp and Tuner

Bridge: Rosewood with Compensated Graph Tech® Nubone™ Saddle

Hardware Finish: Chrome

Pickguard: None

Strings: Fender® Dura-Tone® 880L (.012-.052 Gauge)

UPC 885978276936

Now Back In Stock The Coiltek 6 Inch Goldseeker For Minelab Eureka Gold

http://www.promusicalaska.com/wp-content/uploads/2014/12/Coiltek-6-Inch-GOLDSEEKER-For-Eureka-Gold.jpg Coiltek 6 Inch Goldseeker For Minelab Eureka Gold

TOP 10 PERFORMANCE POINTS

• Fully Submersible Coil as of 1st November 2013


• Ultra-Sensitive to small targets


• Easy pinpointing


• Great manoeuvrability


• Lightweight for comfort


• Robust design


• Works great on 60 kHz frequency


• Great for areas of high trash for good target separation


• Good ability on deeper, larger targets


• Includes skid plate and Nut & Bolt

Coiltek 6 Inch GOLDSEEKER C04-0014 For Minelab Eureka Gold Data Sheet

Now Back In Stock The Minelab Eureka Gold Metal Detector

http://www.promusicalaska.com/wp-content/uploads/2014/11/6386-3002.jpg Minelab Eureka Gold Metal Detector

The Eureka Gold’s exclusive three frequency (3F) technology makes prospecting easier! With 6.4 kHz for maximum depth, 20 kHz for general detecting and with the super-sensitive 60 kHz, gold miners can find the smallest gold nuggets that others are missing. The ACCU-TRAK technology, with Automatic Ground Balance and Tracking eliminates noise from the mineralized ground in goldfields. This switchable two speed Tracking and its discrimination capability allows for greater accuracy on target selection for different sized nuggets. The Eureka Gold comes with a NiMH rechargeable battery pack plus an alkaline battery pack (for 8 standard AA batteries). An ideal option when detecting in remote locations.

Product Features: Classic GOLD prospecting performance 10 x 5-inch Double-D Elliptical coil 3 frequency options – find different size nuggets at different depths ACCU-TRAK – cancel false signals from the ground Audio boost options – amplify faint signals Lightweight, easy, switch on & go detecting In-built speaker Dual control box mounting positions Optional hip or chest mount bag for longer detecting time in the field Alternative coil options available.

UPC 689076357340

Minelab Eureka Gold Operation Video

Now Back In Stock The Coiltek 15 Inch Goldseeker For Minelab Eureka Gold

http://www.promusicalaska.com/wp-content/uploads/2014/10/6362-300.jpg Coiltek 15 Inch Goldseeker For Minelab Eureka Gold

To suit Eureka Gold Detectors

Fully submersible and specifically designed for the Eureka Gold detector this coil can increase depth performance without reducing sensitivity to smaller targets. Best suited to open terrain detecting and working with a slow swing will maximise its ability. Working with this coil is in mild to low mineralisation on the 6.4 KHz or 20 KHz setting you will achieve the coils best potential.

Size: 370 MM

Part Number: C04-0008

Weight: 745 Grams

Coil Type: Round DD

TOP 10 PERFORMANCE POINTS Fully submersible coil Excellent depth Very robust coil Good for open terrain searching More coverage than standard coil Lightweight for easy swinging Well balanced Good sensitivity to smaller targets Works great in the 6.4 KHz and 20 KHz setting Includes Skid plate and Nut and bolt

Now Back In Stock The Sona Paracord Bracelet 9 Inch, 7 Strand, Black

http://www.promusicalaska.com/wp-content/uploads/2015/07/Sona-Paracord-Bracelet-9-Inch-7-strand-Black.jpg Sona Paracord Bracelet 9 Inch, 7 Strand, Black

• 7 Strands

• Knotted Dimensions: 9” x 3/4” x 3/8”

• Usable Cord Size: 8.2ft x 4mm Dia

• Color: Black

• Pull Strength: 430 lbs.

• Medium Wrist Fitting

• Fast Clip Buckle

• 1931N SGS Tested

• Great For Emergencies

UPC 706569071887

Now Back In Stock The Sona Snuffer Bottle 4 Fluid Ounces

http://www.promusicalaska.com/wp-content/uploads/2015/07/Sona-Snuffer-Bottle-4-Fluid-Ounces-527x1024.jpg Sona Snuffer Bottle 4 Fluid Ounces

Tube Size: 4 3/4” x 3/16″ Diameter

Tube Thickness: 1/32”

4 Fluid Ounce Plastic Bottle

UPC 706569073874

Now Back In Stock The Sona Miner"s Moss 36 Inches X 60 Inches Blue

http://www.promusicalaska.com/wp-content/uploads/2015/07/Sona-Miners-Moss-36-Inches-X-60-Inches-Blue.jpg Sona Miner"s Moss 36 Inches X 60 Inches Blue

Miners moss is a great way to increase your fine gold recovery rate. It holds more fine gold than carpet. The miners moss does not have a backing , like carpet, so you might need some V-matting to put below the miners moss, depending on how hard your riffles clamp down.

UPC 706569075809

Now Back In Stock The Proline T80 Air Compressor Kit For 3.5HP To 6.5HP Engines

http://www.promusicalaska.com/wp-content/uploads/2015/07/Proline-T80-Air-Compressor-Kit-For-3.5HP-To-6.5HP-Engines.png Proline T80 Air Compressor Kit For 3.5HP To 6.5HP Engines

It connects easily to dredge motor to supply hookah breathing system.. The T80 compressors are recommended for shallow diving conditions including dredging. Factory recommended RPM is 1800 5/8″ shaft. Produces 1.8 CFM at 45 PSI.

It is suggested to purchase a PS2 pump seal since the pump will need to be removed to install the compressor kit.

Now Back In Stock The Proline M37BS Pegasus Full Face Mask

http://www.promusicalaska.com/wp-content/uploads/2015/07/Proline-M37BS-Pegasus-Full-Face-Mask.jpg Proline M37BS Pegasus Full Face Mask

Excellent face mask if you are using regulator and compressor air kit.

Great for when you want that extra warmth in cold water.

Mouth piece is removed from the regulator, and the regulator (not included) is installed in the mask.

Now Back In Stock The Fender Standard Banjo Hardshell Case

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-Standard-Banjo-Hardshell-Case.png Fender Standard Banjo Hardshell Case

A solid-fitting banjo case is often hard to find, but luckily, Fender has taken out the guesswork, thanks to this durable hardshell case for the well-traveled musician. From the rowdiest jams to the largest stages, your banjo will stay intact while delivering some old-fashioned sparkling sound—no matter what the location or destination.

Standard tolex black cases are made in the traditional shape with locking latches, vinyl ends and padded acrylic interiors. These cases offer a traditional look at an affordable price.

Part#: 0996244306

UPC 717669522391

Now Back In Stock The Fender Standard Stratocaster Lake Placid Blue Maple Fingerboard

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-Standard-Stratocaster-Lake-Placid-Blue-Maple-Fingerboard.jpg Fender Standard Stratocaster Lake Placid Blue Maple Fingerboard

BODY

BODY MATERIAL: Alder

BODY FINISH: Polyester

BODY SHAPE: Stratocaster®

NECK

NECK MATERIAL: Maple

NECK FINISH: Satin Finish on Back, Gloss Finish on Front

NECK SHAPE: Modern “C”

SCALE LENGTH: 25.5″ (648 mm)

FINGERBOARD MATERIAL: Maple

FINGERBOARD RADIUS: 9.5″ (241 mm)

NUMBER OF FRETS: 21

FRET SIZE: Medium Jumbo

NUT MATERIAL: Synthetic Bone

NUT WIDTH: 1.650″ (42 mm)

POSITION INLAYS: Black Dot

TRUSS ROD: Standard

ELECTRONICS

BRIDGE PICKUP: Standard Single-Coil Strat

MIDDLE PICKUP: Standard Single-Coil Strat

NECK PICKUP: Standard Single-Coil Strat

CONTROLS: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Middle Pickup)

SWITCHING: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup

CONFIGURATION: SSS

HARDWARE

BRIDGE: 6-Saddle Vintage-Style Synchronized Tremolo

HARDWARE FINISH: Chrome

TUNING MACHINES: Standard Cast/Sealed

PICKGUARD: 3-Ply Parchment

CONTROL KNOBS: White Plastic

SWITCH TIP: Parchment

NECK PLATE: 4-Bolt Standard

MISCELLANEOUS

STRINGS: Fender® USA Bullets® 3250L, NPS, (.009-.042 Gauges)

ACCESSORIES

CASE/GIG BAG: None

UPC 885978110834

Now Back In Stock The Fender Rumble 100 Combo Bass Amp v3

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-Rumble-100-Combo-Bass-Amp-v3.jpg Fender Rumble 100 Combo Bass Amp v3

FEATURES

100 watts

12” Eminence® Special Design speaker

Compact and lightweight (22 pounds) ported plywood enclosure with removable grille

Overdrive circuit (controlled manually or with optional footswitch)

Three-button voicing section (bright, contour, vintage)

XLR line out with ground lift

ACCESSORIES

FOOTSWITCH: Optional 1-Button Footswitch: Economy (P/N 0994049000), Vintage (P/N 0994054000), LED (P/N 0994052000)

ELECTRONICS

VOLTAGE: 120V

WATTAGE: 100 Watts at 8 Ohms

CONTROLS: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume

CHANNELS: One – (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)

INPUTS: One – 1/4″

EFFECTS LOOP: 1/4″ – (Send/Return)

LINE OUT: One – (XLR with Ground Lift)

HARDWARE

CABINET MATERIAL: Lightweight Plywood

AMPLIFIER COVERING: Black Textured Vinyl

GRILLE CLOTH: Silver

AMPLIFIER JEWEL: Red LED

FRONT PANEL: Painted Metal

HANDLE: Molded Plastic Strap with Nickel-Plated Caps

SPEAKERS

SPEAKERS: One – 12″ Eminence® Special Design

TOTAL IMPEDENCE: 8 ohms

MEASUREMENTS

LENGTH (IN INCHES): 14

WIDTH (IN INCHES): 16.5

HEIGHT (IN INCHES): 18.5

WEIGHT (IN POUNDS): 22

UPC 885978288137

Now Back In Stock The Fender Rumble 40 Combo Bass Amp v3

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-Rumble-40-Combo-Bass-Amp-v3.jpg Fender Rumble 40 Combo Bass Amp v3

FEATURES

• 40 watts


• 10” Fender Special Design speaker


• Compact and lightweight (18 pounds) ported enclosure with removable grille


• Overdrive circuit (controlled manually or with optional footswitch)


• Three-button voicing section (bright, contour, vintage)


• XLR line out with ground lift

ACCESSORIES

FOOTSWITCH: Optional 1-Button Footswitch: Economy (P/N 0994049000), Vintage (P/N 0994054000), LED (P/N 0994052000)

ELECTRONICS

VOLTAGE: 120V

WATTAGE: 40 Watts at 8 ohms

CONTROLS: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume

CHANNELS: One – (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)

INPUTS: One – 1/4″

LINE OUT: One – (XLR with Ground Lift)

HARDWARE

CABINET MATERIAL: Lightweight Plywood

AMPLIFIER COVERING: Black Textured Vinyl

GRILLE CLOTH: Silver

AMPLIFIER JEWEL: Red LED

FRONT PANEL: Painted Metal

HANDLE: Molded Plastic Strap with Nickel-Plated Caps

SPEAKERS

SPEAKERS: One – 10″ Fender® Special Design

TOTAL IMPEDENCE: 8 ohms

MEASUREMENTS

LENGTH (IN INCHES): 12

WIDTH (IN INCHES): 16.5

HEIGHT (IN INCHES): 16.5

WEIGHT (IN POUNDS): 18

UPC 885978288038

Now Back In Stock The Fender Rumble 200 Bass Combo Amp

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-Rumble-200-Bass-Combo-Amp.jpg Fender Rumble 200 Bass Combo Amp

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.

On sight alone, you might not believe that the stylish diminutive Rumble 200 combo actually pumps 200 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it’s built with great features including classic Fender styling, 15” Eminence® speaker and compression horn, overdrive circuit, versatile three-button voicing and more.

ACCESSORIES

FOOTSWITCH: Optional 1-Button Footswitch: Economy (P/N 0994049000), Vintage (P/N 0994054000), LED (P/N 0994052000)

ELECTRONICS

VOLTAGE: 120V

WATTAGE: 200 Watts at 4 ohms (with Extension Cabinet), 140 Watts at 8 ohms (Internal)

CONTROLS: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume

CHANNELS: One – (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)

INPUTS: One – 1/4″

EFFECTS LOOP: 1/4″ – (Send/Return)

LINE OUT: One – (XLR with Ground Lift)

HARDWARE

CABINET MATERIAL: Lightweight Plywood

AMPLIFIER COVERING: Black Textured Vinyl

GRILLE CLOTH: Silver

AMPLIFIER JEWEL: Red LED

FRONT PANEL: Painted Metal

HANDLE: Molded Plastic Strap with Nickel-Plated Caps

SPEAKERS

SPEAKERS: One – 15” Eminence®-Designed Ceramic Magnet Speaker

TOTAL IMPEDENCE: 8 ohms

MEASUREMENTS

LENGTH (IN INCHES): 14

WIDTH (IN INCHES): 19

HEIGHT (IN INCHES): 23

WEIGHT (IN POUNDS): 34.5

UPC 885978288236

Now Back In Stock The Gold Cube 4 Stack Deluxe Sluice

http://www.promusicalaska.com/wp-content/uploads/2015/05/gold-cube-4-stack-complete_LRG.png Gold Cube 4 Stack Deluxe Sluice

Gold is money..so is time!

Move an amazing amount of material through the Gold Cube..up to 1,000 lbs. an hour…even black sand and end up with a coffee cup (or less) of super concentrates.. now that’s time well spent!

It Self Cleans!

Active Vortex Zones gravitate the heavy gold downward thus forcing out lighter materials, even black sand! Each modular tray contains  thousands of these “tornado zones” that continually purge.. you will always keep the gold while removing almost everything else automatically! Go ahead and feed the Gold Cube, it’s a very hungry machine.

It’s Modular!

Stack-able and durable trays are made of “low density Poly” similar to your cutting board at home and fill about the same footprint. This makes the Gold Cube very compact yet tough and ready for any situation you can throw at it.

It’s a No-Brainer!

Everything on the Gold Cube is ready for action..Simply set it up, hook up the 12 volt pump and you’re ready to go! You can pump from a creek or recycle from a tub. Why bring home the creek when all you want is the gold?

New At Pro Music The Summit Mining Gold Bandit Vibrating Sluice

http://www.promusicalaska.com/wp-content/uploads/2015/07/Summit-Mining-Gold-Bandit-Vibrating-Sluice-1024x685.jpg Summit Mining Gold Bandit Vibrating Sluice

Gold Bandit, fine gold recovery unit, comes with:

Includes: gold separator unit, pump, recirculation trough, tailings catch tub, 10″ gold pan, Jet Dry.

Features:

Multiple water adjustments for optimal recovery depending on material.

Adjustable hopper plate to optimize feed rate for material worked.

Vibrating sluice with a variable speed motor for optimal recovery.

Floating sluice; no vibration absorbed into housing. Superior separation / stratification of material.

Deep V-groove matting for catching the, fine, flour gold and for processing more material.

Removable/submersible sluice for easy cleanup.

Pro Music Is Hiring A Sales Clerk/Technician

http://www.promusicalaska.com/wp-content/uploads/2015/04/Pro-Music-Logo-150x150.png Pro Music Is Hiring A Sales Clerk/Technician

Music Store/Prospecting Store Sales Clerk/Technician

Sales Clerk/Technician Full/Part Time. Must be able to make long-term commitment. Sales experience preferred. Applications are available at Pro Music. NO PHONE CALLS OR EMAILS PLEASE!

Now Back In Stock The AKG D112 Microphone

http://www.promusicalaska.com/wp-content/uploads/2014/10/D112.png AKG D112 Microphone

The D112 has earned a well-deserved reputation worldwide as the best kick drum microphone ever made. Heavy-footed drummers are thrilled with the D112´s ability to handle up to 160dB SPL without any distortion. The diaphragm has a very low resonance frequency to maintain a solid and powerful response below 100Hz. A narrow band presence boost at 4kHz punches through dense mixes with forceful impact – no additional EQ needed!

The D112 is also an excellent choice for use with bass cabinets and trombones.

Large diaphragm dynamic microphone

delivers accurate ultradeep frequencies

Bass resonance volume chamber

for unique, punchy sound

Reference dynamic capsule

withstands extremely high sound pressure levels up to 160dB SPL

Integrated hum compensation coil

for the cleanest sound

Established as an industry-standard kick drum microphone

on stages worldwide, day by day for over 30 years

TECHNICAL SPECIFICATION

Audio Frequency Bandwidth: 20 to 17000 Hz

Sensitivity: 1.8 mV/Pa

Electrical Impedance: 200 Ohms

Recommended Load Impedance: 2000 Ohms

Polar Pattern: cardioid

Type: Balanced XLR

Gender: Male

Contacts: 3-pin

Body: Metal

Finish: dark gray/silver

Length: 150 mm

Width: 70 mm

Height: 115 mm

Net Weight: 285 g

AKG D112 Manual

Now Back In Stock The JBL JRX 212 12 Inch Passive Loudspeaker

http://www.promusicalaska.com/wp-content/uploads/2014/10/JBL-JRX-212-12-Inch-Passive-Loudspeaker-1024x673.jpg JBL JRX 212 12 Inch Passive Loudspeaker

Features:

• JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.


• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.


• The advanced network topology crossover design shapes frequency response and delivers “coherent summation” in the crossover region.


• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.


• Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.


• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.


• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.


• Non-resonant, all-steel handles are used.


• Attractive 18-gauge hexagon perforated, steel grille protects components from damage.


• Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.

Specifications:

Power Rating: 250 W / 1000 W

Frequency Range (-10 dB): 60 Hz – 20 kHz

Frequency Response (±3 dB): 80 Hz – 18 kHz

Sensitivity (@1m): 98 dB SPL (1w/1m)

Nominal Impedance: 8 ohms

Recommended Amplifier Power: 250 W to 500 W into 8 ohms

Maximum SPL: 128 dB

Nominal Dispersion: 90º x 50º

Crossover Frequency: 2.1 kHz

Dimensions (H x W x D): 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)

Weight: 19.5 kg (43 lb)

High Frequency Driver: JBL 2414H-C , 1″ exit compression driver mounted on Progressive Transition™ Waveguide

Low Frequency Driver: JBL M112-8

Input Connectors: Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel