Now Back In Stock The Shure P3TRA215CL-J13 Wireless Personal Monitor System

Shure P3TRA215CL-J13 Wireless Personal Monitor System

The P3TRA215CL is part of the PSM 300 wireless systems family.

PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.

Now Back In Stock The dbx 215S Dual Channel 15 Band Equalizer

dbx 215S Dual Channel 15 Band Equalizer

When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 215s includes two 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound.

Specifications

Input Connectors 1/4″ TRS, female XLR (pin 2 hot)

Input Type Electronically balanced/unbalanced, RF filtered

Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm

Max Input >+21dBu balanced or unbalanced

CMRR >40dB, typically >55dB at 1kHz

Output Connectors 1/4″ TRS, male XLR (pin 2 hot)

Output Type Impedance-balanced/unbalanced, RF filtered

Output Impedance Balanced 100 ohm, unbalanced 50 ohm

Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth 20Hz to 20kHz, +0.5/-1dB

Frequency Response <10Hz to >50kHz, +0.5/-3dB

Dynamic Range Typically >112dB

Signal to Noise Ratio Typically >95dB

THD+Noise <0.003%

Interchannel Crosstalk <-90db, 20Hz to 20kHz

Bypass Switch Bypasses the graphic equalizer section in the signal path

Low cut Switch Activates the 50Hz 12dB/octave Bessel high-pass filter

Range Switch Selects either +/- 6dB or +/- 12dB slider boost/cut range

Operating Voltage 100VAC-240VAC 50/60Hz

Power Consumption 15W

Power Connector IEC receptacle

Unit Weight 4.8 lbs.(2.2 kg)

Shipping Weight 6.2 lbs.(2.8kg)

Dimensions 1.75″ (4.4cm) H x 6″(15.24cm) D x 19″ (48.26cm) W

dbx 215S Dual Channel 15 Band Equalizer Manual

Now Back In Stock The Schaller 14010101 Guitar Strap Security Lock, Nickel

Schaller 14010101 Guitar Strap Security Lock, Nickel

Schaller Guitar Strap Security Lock, Nickel, 14010101

Schaller Security Locks can be used on acoustic guitars as well. Screw Security Lock pin into tailblock and heel. Avoid screwing into the unreinforced part of the sides.

UPC 04036641145769

Now Back In Stock The Fender Acoustasonic 90 Combo Amp

Fender Acoustasonic 90 Combo Amp

The Fender Acoustasonic 90 is perfect for the acoustic guitarist who needs compact, powerful and affordable amplification, packing pure tone, great features and stage-worthy performance into a versatile and lightweight combo amp.

ACCESSORIES

FOOTSWITCH: Optional 2-Button Effects Select Footswitch is Available (P/N: 0064673000)

ELECTRONICS

VOLTAGE: 120V

WATTAGE: 90 Watts

CONTROLS: Instrument Channel: Volume, Phase Switch, Treble, Mid, Bass, String Dynamics, FX Select, FX Level. MIC Channel: Volume, Phase Switch, Treble, Bass, FX Select, FX Level.

CHANNELS: Two – (Instrument and Microphone)

INPUTS: Two – (One 1/4″ and One XLR / 1/4″ Combination Jack)

LINE OUT: One – (XLR with Ground Lift)

HARDWARE

CABINET MATERIAL: 5-Ply 5/8″ Lightweight Plywood

AMPLIFIER COVERING: Brown Textured Vinyl

GRILLE CLOTH: Black

AMPLIFIER JEWEL: Red LED

HANDLE: Molded Plastic Strap with Nickel-Plated Caps

MISCELLANEOUS

PART NUMBER: 2313800000

LEGAL NOTICE: Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice

SPEAKERS

SPEAKERS: One – 8″ Fender® Special Design

TOTAL IMPEDANCE: 8 ohms

MEASUREMENTS

DEPTH (IN INCHES): 9.81

HEIGHT (IN INCHES): 15.375

WIDTH (IN INCHES): 19.37

WEIGHT (IN POUNDS): 18

UPC 885978323999

Fender Acoustasonic 90 Combo Amp Manual

Now Back In Stock The Fender CD100-12 v2 12-String Acoustic Guitar

Fender CD100-12 v2 12-String Acoustic Guitar

BODY

BODY BACK: Laminated Mahogany

BODY SIDES: Laminated Mahogany

BODY TOP: Laminated Spruce

BODY FINISH: Satin

BODY SHAPE: Dreadnought

BRACING: Scalloped X

ROSETTE: Mother-of-Pearl Acrylic

NECK

NECK MATERIAL: Mahogany

NECK FINISH: Satin

NECK SHAPE: “C” Shape

SCALE LENGTH: 25.3″ (643 mm)

FINGERBOARD MATERIAL: Rosewood

FINGERBOARD RADIUS: 11.81″ (300 mm)

NUMBER OF FRETS: 20

NUT MATERIAL: Graph Tech® NuBone™

NUT WIDTH: 1.89″ (48 mm)

POSITION INLAYS: Pearloid Dot

TRUSS ROD: Dual-Action

HARDWARE

BRIDGE: Rosewood with Compensated Graph Tech® Nubone™ Saddle

BRIDGE PINS: White with Black Dots

HARDWARE FINISH: Chrome

TUNING MACHINES: Die-Cast

PICKGUARD: 1-Ply Black

MISCELLANEOUS

STRINGS: Fender® Phosphor Bronze 70-12L, 80/20 (.010-.048 Gauges)

OTHER FEATURES: Dual Action Truss Rod, 3mm Dot Position Inlays, Black Pickguard, White Bridge Pins, Crushed Acrylic Rosette, Rosewood Headstock Veneer and All Satin Finish

ACCESSORIES

CASE/GIG BAG: None

UPC 717669961725

Now Back In Stock The Fender Rumble 200 Bass Combo Amp

http://www.promusicalaska.com/wp-content/uploads/2014/10/Fender-Rumble-200-Bass-Combo-Amp.jpg Fender Rumble 200 Bass Combo Amp

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.

On sight alone, you might not believe that the stylish diminutive Rumble 200 combo actually pumps 200 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it’s built with great features including classic Fender styling, 15” Eminence® speaker and compression horn, overdrive circuit, versatile three-button voicing and more.

ACCESSORIES

FOOTSWITCH: Optional 1-Button Footswitch: Economy (P/N 0994049000), Vintage (P/N 0994054000), LED (P/N 0994052000)

ELECTRONICS

VOLTAGE: 120V

WATTAGE: 200 Watts at 4 ohms (with Extension Cabinet), 140 Watts at 8 ohms (Internal)

CONTROLS: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume

CHANNELS: One – (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)

INPUTS: One – 1/4″

EFFECTS LOOP: 1/4″ – (Send/Return)

LINE OUT: One – (XLR with Ground Lift)

HARDWARE

CABINET MATERIAL: Lightweight Plywood

AMPLIFIER COVERING: Black Textured Vinyl

GRILLE CLOTH: Silver

AMPLIFIER JEWEL: Red LED

FRONT PANEL: Painted Metal

HANDLE: Molded Plastic Strap with Nickel-Plated Caps

SPEAKERS

SPEAKERS: One – 15” Eminence®-Designed Ceramic Magnet Speaker

TOTAL IMPEDENCE: 8 ohms

MEASUREMENTS

LENGTH (IN INCHES): 14

WIDTH (IN INCHES): 19

HEIGHT (IN INCHES): 23

WEIGHT (IN POUNDS): 34.5

UPC 885978288236

Fender Rumble 200 Manual

Now Back In Stock The Shure Super 55 Microphone

http://www.promusicalaska.com/wp-content/uploads/2015/10/Shure-Super-55-Microphone.jpg Shure Super 55 Microphone

The Super 55 Deluxe Vocal Microphone features a signature satin chrome-plated die-cast casing, Supercardioid polar pattern, vibrant blue foam, and tailored frequency response for natural vocals and speech. Integrated, swivel stand mount is included.

The combination of updates make the Super 55 the ideal choice when looking for a dramatic – yet affordable – improvement in sound quality with an unmistakable vintage design.

Ideal for stage, studio recording, podcasting, and other sound applications where a stand-mounted microphone with a classic look is desired.

Features

Iconic chrome-plated design with vibrant blue color additions

Tailored frequency response for natural vocals and speech

High gain-before-feedback and excellent off-axis rejection

Shock-mounted cartridge minimizes handling noise and ensures quiet operation

Rugged die cast casing for reliability under rigorous conditions

Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backward

Click to launch MicLab

Now Back In Stock The Shure X2u Mic USB Adaptor

Shure X2u Mic USB Adaptor

Adapter transforms your favorite XLR microphone to a USB microphone for digital recording.

Features headphone jack with volume control for monitoring

Provides phantom power for use with condenser microphones

Offers an integrated pre-amp that allows control of input signal strength

Includes X2u, USB cable, zippered storage bag, and user guide

Perfect for multi-track recording, the X2u features built-in headphone monitoring with zero latency, and easy controls to balance microphone and playback audio. Just plug and play for better-than-CD quality sound.

Features

Plug and Play USB Connectivity allows the convenience of digital recording, anywhere your computer can go (compatible with Windows 8.1 64-bit, Windows 8, Windows 7, Vista, XP, 2000, and Mac OS X 10.1 or later)

Provides +48V Phantom power

USB cable (3m / 9.8ft) included for immediate use

Monitor Mix Control for blending microphone and playback audio

Headphone jack with volume control for monitoring

Integrated pre-amp with Microphone Gain Control allows control of input signal strength

Zero Latency Monitoring for real-time playback and multi-tracking without disorientation

16 bit, up to 48 kHz sample rate for better-than-CD quality audio

Shure X2u Mic USB Adaptor Manual

Now Back In Stock The JBL JRX 212 12 Inch Passive Loudspeaker

JBL JRX 212 12 Inch Passive Loudspeaker

Features:

• JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.


• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.


• The advanced network topology crossover design shapes frequency response and delivers “coherent summation” in the crossover region.


• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.


• Progressive Transition™ high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.


• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.


• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.


• Non-resonant, all-steel handles are used.


• Attractive 18-gauge hexagon perforated, steel grille protects components from damage.


• Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage.

Specifications:

Power Rating: 250 W / 1000 W

Frequency Range (-10 dB): 60 Hz – 20 kHz

Frequency Response (±3 dB): 80 Hz – 18 kHz

Sensitivity (@1m): 98 dB SPL (1w/1m)

Nominal Impedance: 8 ohms

Recommended Amplifier Power: 250 W to 500 W into 8 ohms

Maximum SPL: 128 dB

Nominal Dispersion: 90º x 50º

Crossover Frequency: 2.1 kHz

Dimensions (H x W x D): 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)

Weight: 19.5 kg (43 lb)

High Frequency Driver: JBL 2414H-C , 1″ exit compression driver mounted on Progressive Transition™ Waveguide

Low Frequency Driver: JBL M112-8

Input Connectors: Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

Now Back In Stock The Mackie SRM150 Compact Active PA System

Mackie SRM150 Compact Active PA System

The SRM150 combines Mackie’s proven mixer and SRM Active loudspeaker technologies to create a powerful, great-sounding 3-channel PA system that is ultra-compact, versatile and expandable. The Mackie SRM150 Compact Active PA System is ideal for a wide variety of applications ranging from boardroom A/V to live musical performance in coffee houses, piano bars, or rehearsals, just to name a few. Do not be fooled by the small size. The SRM150 is big on features and sound quality. The built-in three-channel mixer features two combo XLR/line inputs (with true 48V phantom power), a stereo channel for CD/MP3 players, and Mackie’s powerful 3-band Active EQ. The SRM150 can even be mounted on a mic stand, making it the ideal personal monitor. Put simply, with its tremendous feature set and 150-watts of world-class sound, the Mackie SRM150 is the perfect solution for any application requiring superior sound quality.

Extremely portable active loudspeaker system

Built-in Mackie mixer for superior sound quality with:

3-channel mixer with 3-band active EQ

2 high-headroom Mackie Mic/line preamps with 48V phantom power

Instrument-ready input (no DI required)

Dedicated stereo channel for keyboards, CD, MP3, iPods, etc.

Combo “line in” for linking or adding inputs

XLR “thru” with mic/line switch for linking more SRM150s or direct send to main PA

150-watts of high output, Class-D power

5.25″ premium-quality, full-range neodymium driver

Frequency Response: 100Hz to 17.5kHz

Complete system protection with built-in limiter

120 dB Maximum SPL@1meter

Built-in top carry handle

Integral aluminum heat sink

Mic stand integration system for use with stand and boom

Tough, impact-resistant, polypropylene enclosure

Mackie SRM150 Manual

Now Back In Stock The Mackie ProFX22v2 Mixer

Mackie ProFX22v2 Mixer

Unmatched Sound Quality

• Extremely low-noise Mackie Vita mic preamps

designed to add life to any input

• All-new ReadyFX™ effects engine with 16 great-

sounding effects like reverbs, delays and choruses

• Single-knob channel compression for smooth,

even dynamic control

No-Compromise Live Mixing Toolkit

• Graphic EQ for tuning mains or monitors

• Built-in USB interface to record the show

or provide music playback

• 4 flexible subgroups for professional mix

management

• Aux output(s) perfect for driving a monitor mix,

fill speakers and more

• Additional stereo channels

• Extra stereo/aux return for external effects

or stereo playback devices

• High-headroom line level inputs

• Individual channel mutes and overload indication

• Channel inserts for connecting outboard processing

• EQ on all channels

• 60mm faders

• 100Hz low-cut filter and 48V phantom power

on all mic channels

• Stereo RCA tape I/O with input level control

• Control room / headphone outs with level control

• Balanced XLR and/or balanced/unbalanced

1⁄4-inch main outputs

• FX mute with remote control via footswitch

• Break switch mutes all channels for music playback

between sets

No-Hassle USB Recording/Playback

• Built in USB recording interface with simple

setup via Mac or PC

• Choose to record subgroups 1/2

or main L/R mix

• Separate USB input level control to mains

• USB routable to full-featured channel strip1

Great for live recording and perfect for home studios Stream playback music for live or studio applications

Includes user-friendly Tracktion® recording

software

Mackie ProFX22v2 Mixer Manual

Now Back In Stock The Fender Concert Tone Banjo Pack

Fender Concert Tone Banjo Pack

The Concert Tone Banjo Series presents modern interpretations of the classic Fender Concert Tone banjos of the 1960s. Just like the popular instruments of that decade, today’s Concert Tone banjos are finely crafted for rich sound, smooth playing feel and elegant looks. Whether you’re new to the instrument or an experienced player, the affordable Concert Tone Banjo Pack delivers everything you need, including a premium Concert Tone five-string banjo, gig bag, tuner, strings, picks and instructional materials.

BODY

BODY FINISH: Gloss Polyurethane

BODY SHAPE: Banjo

RIM MATERIAL: Multi-Ply Mahogany

RESONATOR MATERIAL: Multi-Ply Mahogany

HOOKS: 18

NECK

NECK MATERIAL: Mahogany

NECK FINISH: Gloss Polyurethane

NECK SHAPE: Rounded “V”

SCALE LENGTH: 27.4″ (696 mm)

FINGERBOARD RADIUS: Flat

NUMBER OF FRETS: 22

NUT MATERIAL: Synthetic Bone

NUT WIDTH: 1.18″ (30 mm)

POSITION INLAYS: Dot

HARDWARE

BRIDGE: Maple/Rosewood

HARDWARE FINISH: Chrome

TUNING MACHINES: Open-Gear Die-Cast

PICKGUARD: None

MISCELLANEOUS

STRINGS: Fender® USA NPS Banjo Strings (.0095-.020 Gauges)

OTHER FEATURES: Dot Position Inlays, Chrome Arm Rest and Tailpiece, White Tipped Tuning Machines

LEGAL NOTICE: Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice

ACCESSORIES

CASE/GIG BAG: Standard Gig Bag

INCLUDED ACCESSORIES: Gig Bag, Strings, Tuner, Picks, Instructional Materials

PART NUMBER 0965605021

UPC 885978542819

Now Back In Stock The Fender Concert Tone 54 Banjo

Fender Concert Tone 54 Banjo

The Concert Tone Banjo Series presents modern interpretations of the classic Fender Concert Tone banjos of the 1960s. Just like the popular instruments of that decade, today’s Concert Tone banjos are finely crafted for rich sound, smooth playing feel and elegant looks. The Concert Tone 54 Banjo offers the most affordable sound and style in the series, with fine features including a rolled steel tone ring, gloss-finish mahogany resonator with aged white binding and black trim, mahogany rim, gloss-finish mahogany neck, and “vintage nouveau” acrylic white pearl inlay work with a “Concert Tone” block inlay at the 18th fret.

BODY

BODY FINISH: Gloss Polyurethane

BODY SHAPE: Banjo

RIM MATERIAL: Multi-Ply Mahogany

RESONATOR MATERIAL: Multi-Ply Mahogany

HOOKS: 24

NECK

NECK MATERIAL: Mahogany

NECK FINISH: Gloss Polyurethane

NECK SHAPE: Rounded “V”

SCALE LENGTH: 26.4″ (671 mm)

FINGERBOARD RADIUS: Flat

NUMBER OF FRETS: 22

NUT MATERIAL: Synthetic Bone

NUT WIDTH: 1.18″ (30 mm)

POSITION INLAYS: White Pearloid Filigree

HARDWARE

BRIDGE: Maple/Ebony

HARDWARE FINISH: Chrome

TUNING MACHINES: Standard Open-Gear

PICKGUARD: None

MISCELLANEOUS

STRINGS: D’Addario® J61, Nickel, (.010-.023 Gauges)

OTHER FEATURES: Black Acrylic Headstock Overlay with “Vintage Nouveau” White Pearloid and Blue Green Abaloid Filigree Inlay, White Pearloid Fender Headstock Logo and Fingerboard Position Inlays with “Concert Tone” Block Inlay at the 18th Fret, White Pearloid Tuning Machine Buttons

LEGAL NOTICE: Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice

ACCESSORIES

CASE/GIG BAG: None

PART NUMBER 0955615021

UPC 717669752903

Now Back In Stock The Fender CJ-290SCE Jumbo Acoustic-Electric Guitar With Hardshell Case

Fender CJ-290SCE Jumbo Acoustic-Electric Guitar With Hardshell Case

Whether you’re stepping onstage at open-mic night to showcase your latest compositions or heading into the studio to record them, the CJ-290SCE Jumbo Maple has everything you need for that classic jumbo sound. You get the magical combination of full and deep low end with the sparkle that only a maple body can offer. With its big acoustic sound and versatile onboard electronics, the CJ-290SCE might quickly become your go-to acoustic for every gig. Includes Hardshell Case.

BODY

BODY BACK: Laminated Flame Maple

BODY SIDES: Laminated Flame Maple

BODY TOP: Solid Spruce

BODY FINISH: Gloss Polyurethane

BODY SHAPE: Jumbo Cutaway

BRACING: Scalloped X

ROSETTE: Acrylic Abalone

NECK

NECK MATERIAL: Maple

NECK FINISH: Satin

NECK SHAPE: “C” Shape

SCALE LENGTH: 25.3″ (643 mm)

FINGERBOARD MATERIAL: Rosewood

FINGERBOARD RADIUS: 11.81″ (300 mm)

NUMBER OF FRETS: 20

NUT MATERIAL: Graph Tech® NuBone™

NUT WIDTH: 1.625″ (41.3 mm)

POSITION INLAYS: Dot

TRUSS ROD: Dual-Action

ELECTRONICS

SPECIAL ELECTRONICS: Fishman® Presys Pickup System with Active Onboard Preamp and Tuner

HARDWARE

BRIDGE: Rosewood with Compensated Graph Tech® Nubone™ Saddle

BRIDGE PINS: Black with Abalone Dots

HARDWARE FINISH: Gold

TUNING MACHINES: Die-Cast

PICKGUARD: Tortoiseshell

MISCELLANEOUS

STRINGS: Fender® Dura-Tone® 880L (.012-.052 Gauge)

OTHER FEATURES: Dual Action Truss Rod, Tortoise Shell Pickguard, Quartersawn Scalloped X Bracing, Compensated Graphtech® Nubone™ Saddle, MOP Inlaid Headstock Logo, Traditional Fender Bridge, Factory Mounted Forward Strap Button with Internal Block Reinforcement, 3mm Dot Position Inlays, Abalone Rosette and Ivoroid Binding

LEGAL NOTICE: Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice

ACCESSORIES

CASE/GIG BAG: Hardshell Case

PART NUMBER 0961565221

UPC 885978544486