Now Back In Stock The Keene 1753H 3 Inch Highbanker - Dredge Combo With Honda GX200 (*Local Pickup Only)

Keene 1753H 3 Inch Highbanker - Dredge Combo With Honda GX200 (*Local Pickup Only)

This is Keene’s 175 Combination Dredge – Power Sluice, powered by a 6 HP Honnda Engine with the addition of a 3 inch dredge suction nozzle, 15 feet of 3 inch suction hose and 12 feet of additional pressure hose to extend the suction system.

Net weight 107 pounds for sluice, hopper, and stand.

The sluice box works extremely well for dredging because the material is pre-classified before entering the sluice box.

Combination units are ideally suited for shallow water areas with the power sluice being so simple to set up and requiring less water then a standard dredge to operate. This combination model can be equipped with an air compressor for diving.

#ProMusic

Now Back In Stock The Keene GW25 Gold Wheel

Keene GW25 Gold Wheel

A new professional 25 inch gold wheel that produces unparalleled performance in both speed and fine gold recovery. Recover ultra fine gold better than anything you have ever seen before. This amazing recovery is due to its soft rubber spiral wheel that has an extremely cupped sharp edge riffle. Experience precise and smooth speed control with its long life replaceable geared bearings spiral wheel. Equipped with electrical back panel with speed control, plug in battery, pump terminals and on/off switch. Another unique feature is the metered gold tube that easily screws into the back of the wheel to remove values and a black sand collection funnel to collect a first run of concentrates. The water flow tube has metered water jets for precise flow. Set up by inserting three stainless steel legs and connect a 12 v battery and your ready to witness the most advanced recovery spiral system on the market today.

NOTE: 5 gallon bucket and battery not included.

Net Weighs 28 lbs.

#ProMusic #SpiralPanningMachine

Now Back In Stock The Gretsch G9126 Guitar-Uke With Gig Bag

Gretsch G9126 Guitar-Uke With Gig Bag

General

Model Name: Gretsch® G9126 Guitar-Ukulele w/Gig Bag, Rosewood Fingerboard, Natural

Model Number: 2730046321

Series: Gretsch® Roots Collection

Color: Natural

Body

Body Shape: Ukulele

Bracing: Fan

Rosette: Acrylic Abalone

Body Material: Laminated Mahogany

Body Finish: Open-Pore Semi-Gloss

Body Back: Laminated Mahogany

Body Sides: Laminated Mahogany

Body Top: Solid Quartersawn Mahogany

Neck

Neck Material: 1-Piece Mahogany

Neck Shape: Medium “C”

Scale Length: 17″ (432 mm)

Number of Frets: 19 (14 to body)

String Nut: Bone

Nut Width: 1.875″ (47.6 mm)

Headstock: 1920’s Gretsch® 3×3 Slotted

Neck Finish: Open-Pore Semi-Gloss

Fingerboard: Rosewood

Position Inlays: Abalone “Snowflake”

Hardware

Bridge: Rosewood with Bone Saddle

Tuning Machines: Grover® Sta-Tite™ Die-Cast

Orientation: Right-Hand

Pickguard: None

Miscellaneous

Strings: Standard Classical

Unique Features: Six-String Ukulele tuned “A” to “A”; Solid Mahogany Top; Bone Nut and Saddle; MOP Headstock Inlays.

UPC 885978317455

Now Back In Stock The Gretsch G5435T Pro Jet With Bigsby Black

Gretsch G5435T Pro Jet With Bigsby Black

NEW! NEW! NEW! Electromatic® Pro Jet models take on a new voice and identity, with chambered basswood bodies and arched maple tops that resonate true to That Great Gretsch Sound, a two-tone body color scheme (Black or Gold tops with Walnut-stained back and sides), dual Black Top FilterTron™ pickups and Bigsby® B50 tailpieces. Other classic features include rosewood fingerboard with 22 medium jumbo frets and hump block inlays, three-position pickup toggle switch, anchored Adjusto-Matic™ bridge, G arrow knobs, white pearloid Gretsch-logo pickguard and threaded/knurled strap buttons.

Model Name: G5435T Pro Jet™ with Bigsby®

Series: Electromatic Collection

Color: Black

Part#: 250-7010-506

Body Shape: Jet™ Body

Back: Basswood

Body Top: Arched 3-Ply Maple Top

Number of Frets: 22

Fret Size: Medium Jumbo

Position Inlays: Pearloid Hump-Block Inlays

Fingerboard Radius: 12 inches Radius (305 mm)

Fretboard: Rosewood

Neck Material: Maple

Nut Width: 1.6875 inches (43 mm)

Scale Length: 24.6 inches (62.5 cm)

Headstock: Jet™ Style

Truss Rods: Standard Truss Rod

Bridge Pickup: Blacktop FilterTron™ Bridge Pickup

Neck Pickup: Blacktop FilterTron™ Neck Pickup

Pickup Switching: 3-Position Toggle: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup Controls: Volume 1. (Neck Pickup), Volume 2. (Bridge Pickup), Master Volume, Master Tone

Hardware Finish: Chrome

Bridge: Anchored Adjusto-Matic™ Bridge

Tuning Machines: Enclosed Die-Cast Tuning Machines

String Nut: Synthetic Bone

Switch Tips: Chrome

Strings: D’Addario® XL110 Regular Light, NPS (.010-.046 Gauges)

Unique Features: Two-Tone Body Color Scheme, “Black Top” Filter’Tron™ pickups, Bigsby® Licensed B50 Vibrato Tailpiece

Control Knobs: G Arrow Knobs

#ProMusic

Back To School Sale! Save $20 On All School Band Instruments

http://www.promusicalaska.com/wp-content/uploads/2015/08/Back-To-School-Sale.jpg Back To School Sale! Save $20 On All School Band Instruments

Save today and get $20.00 off all band instruments and violins. Please enter the coupon code [school] during checkout and save!

Qualifying Products:

Eldon EAS410LN Eb Alto Saxophone With Case

Eldon ECL475 Bb Clarinet With Case

Eldon ELF220 C Flute With Case

Eldon ETP130 Bb Trumpet

Becker 1000SC Violin Package 4/4

Becker 1000SC Violin Package 3/4

Becker 175C Violin Package 1/2

Fender DG-8S Solid Top Value Acoustic Guitar Pack v2

Now Back In Stock The Eldon ECL475 Bb Clarinet With Case

http://www.promusicalaska.com/wp-content/uploads/2014/10/Eldon-ECL475-Bb-Clarinet-With-Case.jpg Eldon ECL475 Bb Clarinet With Case

Eldon ECL475 Bb Clarinet With Case. Made by Antigua Winds

Stylish wood-grain textured body

• Precision designed barrel, body and bell ensure full range intonation


• Nickel plated barrel and bell rings, thumb rest


• Power forged keys provide strength and durability


• Inline trill keys


• ABS mouthpiece


• Outfit includes lightweight collegiate case, cork grease and reed

UPC 00471898140633

Now Back In Stock The Eldon ELF220 C Flute With Case

http://www.promusicalaska.com/wp-content/uploads/2014/10/Eldon-ELF220-C-Flute.jpg Eldon ELF220 C Flute With Case

Eldon ELF220 C Flute With Case. Made by Antigua Winds

Plateau style closed-hole model

• Silver-plated head joint, body and foot joint for centered tone


• Fully ribbed construction


• Split E key – an advanced feature not found in all student flutes


• Offset G key to reduce left hand stress


• Power forged silver plated keys for increased durability


• Rolled tone holes


• .016” head joint and body wall thickness


• Y arm


• Outfit includes lightweight collegiate case and cleaning rod

UPC 00471898144457

Now Back In Stock The Eldon ETP130 Bb Trumpet

http://www.promusicalaska.com/wp-content/uploads/2014/10/5592-300.jpg Eldon ETP130 Bb Trumpet

Eldon ETP130 Bb Trumpet With Collegiate Case. Made by Antigua Winds

Distinctive red brass lead pipe and engraved lacquered yellow brass bell

• 0.459” bore, 4.9” bell


• 1st valve saddle for enhanced intonation


• Adjustable 3rd valve ring for fine tuning


• Hand lapped stainless steel pistons provide immediate response


• Brass inner and nickel/silver outer slides enhance durability


• 7C silver plated mouthpiece


• Outfit includes lightweight collegiate case and polishing cloth

UPC 00471898140459

Now Back In Stock The Becker 1000SC Violin Package 4/4

http://www.promusicalaska.com/wp-content/uploads/2014/10/Becker-1000SC-Violin-Package-44.png Becker 1000SC Violin Package 4/4

Becker 1000SC Violin Package 4/4

SYMPHONY SERIES

Crafted in Romania from select seasoned woods with graduated solid spruce top, solid maple back, maple sides, solid maple scroll and neck, inlaid purfling, ebony fingerboard, pegs, nut, saddle and tailpiece, fully fitted Bausch maple bridge, composite chinrest, four Wittner string adjusters, DAddario Prelude strings, Wittner tailpiece adjuster. Warm brown satin finish. Set up and adjusted to MENC specifications.

Accessories Included: TKL Zero Gravity backpack case, Glasser fiberglass horsehair bow, rosin

UPC 717070119395

Now Back In Stock The Jackson JS32T King V Black Rosewood Fingerboard

Jackson JS32T King V Black Rosewood Fingerboard

GENERAL

Model Name: JS32T King V™, Rosewood Fingerboard, Strings-Thru-Body, Gloss Black

Model Number: 2910124503

Series: JS

Color: Gloss Black

BODY

Body Material: Basswood

Body Finish: Gloss Polyurethane

Body Shape: King V™

NECK

Neck Material: 1-Piece Bolt-On Maple Speed Neck with Graphite Reinforcement and Scarf Joint

Neck Finish: Satin

Neck Shape: Speed Neck

Scale Length: 25.5″ (648 mm)

Fingerboard: Rosewood

Fingerboard Radius: 12″ to 16″ Compound Radius (304.8 mm to 406.4 mm)

Number of Frets: 24

Fret Size: Jumbo

String Nut: Plastic

Nut Width: 1.685″ (42.8 mm)

Position Inlays: Pearloid Sharkfin

Head Stock Binding: White

Headstock: Jackson® Pointed 6-In-Line

Neck Plate: Jackson®

ELECTRONICS

Bridge Pickup: Jackson® High Output Humbucking

Neck Pickup: Jackson® High Output Humbucking

Controls: Master Volume, Master Tone

Pickup Switching: 3-Position Toggle: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup

Pickup Configuration: HH

HARDWARE

Bridge: Jackson® Compensated and Adjustable Strings-Through-Body

Hardware Finish: Black

Tuning Machines: Jackson® Sealed Die-Cast

Control Knobs: Dome Style

MISCELLANEOUS

Strings: NPS, .009-.042 Gauges

Unique Features: White Binding on Neck and Headstock, Black Hardware and “Zebra” Style Pickup Cov

UPC 885978335626

#ProMusic

Now Back In Stock The Fender Ukulele "52

Fender Ukulele "52

For the musician who wants to stand out from the crowd, we present the Ukulele ’52—a cool and affordable electric ukulele shaped like a Telecaster. With its spruce top and mahogany back and sides, it’s built to sound sweet and stay sturdy for your recordings and live shows. Even at its low price, it gives you high-quality onboard electronics and premier components such as a rosewood fingerboard, mahogany neck and aged white binding.

BODY

BODY BACK: Laminated Mahogany

BODY SIDES: Laminated Mahogany

BODY TOP: Laminated Spruce

BODY FINISH: Gloss Urethane

BODY SHAPE: Ukulele

BRACING: Tone Bar

NECK

NECK MATERIAL: Mahogany

NECK FINISH: Gloss Urethane

NECK SHAPE: “U” Shape

SCALE LENGTH: 15.1″ (384 mm)

FINGERBOARD MATERIAL: Rosewood

FINGERBOARD RADIUS: Flat

NUMBER OF FRETS: 19

NUT MATERIAL: Synthetic Bone

NUT WIDTH: 1.38″ (35 mm)

POSITION INLAYS: Pearloid Dot

ELECTRONICS

SPECIAL ELECTRONICS: Fishman® KULA Preamp with Built-in Tuner

HARDWARE

BRIDGE: Rosewood with Compensated Synthetic Bone Saddle

HARDWARE FINISH: Nickel-Plated

TUNING MACHINES: Vintage-Style

PICKGUARD: None

MISCELLANEOUS

STRINGS: Aquila Nylagut® Concert C

OTHER FEATURES: Aged White Body and Fretboard Binding, Telecaster Guitar Headstock and Body Shape with Gold Screened Fender Logo, 3-Piece Mahogany Neck, Maple Headstock Overlay, Aged White Heel Cap

LEGAL NOTICE: Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice

ACCESSORIES

CASE/GIG BAG: None

Part# 0955566021

UPC 885978276974

#ProMusic

Now Back In Stock The Jobe 1/8 Inch Mesh Stainless Steel Classifier Screen

Jobe 1/8 Inch Mesh Stainless Steel Classifier Screen

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

#ProMusic

Now Back In Stock The Jobe 45″ Yellow Jacket Sluice Box

Jobe 45″ Yellow Jacket Sluice Box

The JOBE 45 is 10 inches wide and 45 inches long weighing only 9 pounds. The riffles are designed for superior recovery under different water and gravel conditions. The first few riffles are stream riffles to make it easier for the water to start to move the material, followed by Hungarian riffles to enhance recovery if greater stream volume is available. A section of diamond cut raised aluminum is included for enhanced fine gold recovery. The steel riffles are plated for decades of durable service. Accessories are available to convert the 45 inch sluice into a power hibanker or a dredge. The 45 inch sluice has a removable flare.

45 Inch Yellow Jacket Sluice Manual

#ProMusic

Our Best Selling Gold Wheel The Jobe GLP Gold Miner Gold Wheel

Jobe GLP Gold Miner Gold Wheel

The Gold Mining Gold Wheel. Built-in Agitators Vibrate concentrates to settle gold. Decreases processing time 25%. Self-contained carrying case. Runs all day on three gallons of water. The entire weight of the unit is less than 9 lbs including the self-contained carrying case. The spiral pan is 12 inches in diameter. All components are designed for rugged outdoor use with no lubrication or maintenance. Runs on 12 volts DC. The Gold Miner is the only spiral wheel with this gold grabbing feature. The water volume from the spray bar is adjustable to accurately remove the black sand and leave you with clean gold.

Includes DC Water Pump.

12 Volt Battery Not Included.

Now Back In Stock The Gold Cube 4 Stack Deluxe Sluice

http://www.promusicalaska.com/wp-content/uploads/2015/05/gold-cube-4-stack-complete_LRG.png Gold Cube 4 Stack Deluxe Sluice

Gold is money..so is time!

Move an amazing amount of material through the Gold Cube..up to 1,000 lbs. an hour…even black sand and end up with a coffee cup (or less) of super concentrates.. now that’s time well spent!

It Self Cleans!

Active Vortex Zones gravitate the heavy gold downward thus forcing out lighter materials, even black sand! Each modular tray contains  thousands of these “tornado zones” that continually purge.. you will always keep the gold while removing almost everything else automatically! Go ahead and feed the Gold Cube, it’s a very hungry machine.

It’s Modular!

Stack-able and durable trays are made of “low density Poly” similar to your cutting board at home and fill about the same footprint. This makes the Gold Cube very compact yet tough and ready for any situation you can throw at it.

It’s a No-Brainer!

Everything on the Gold Cube is ready for action..Simply set it up, hook up the 12 volt pump and you’re ready to go! You can pump from a creek or recycle from a tub. Why bring home the creek when all you want is the gold?